Vertical Axis Wind Power Generation Prototype

Updated: Final Product Installed.

earthship dynasphere

Wind turbines create electrical energy by harnessing the moving energy of the wind. The wind turns a wheel which creates mechanical energy in turn spinning a connecting generator and producing electrical energy. Most conventional wind turbines are on a horizontal axis meaning they rotate and look like pinwheels in the sky. Mike's Design rotates vertically like the amusement part ride the tea cups minus the overambitious person spinning the tea cup on their own.

The pinwheel approach is the convention, but would the Earthship founder and creator follow any conventional norms without questioning ... is this really the best way? What do you think? The horizontal axis conventional construction method has to be facing into the wind so a location with wind that changes direction can be hard for the horizontal wind turbine to cope with. Even when design changes are made there is still a high failure rate, or best case scenario no power generation.

A vertical axis wind turbine has several advantages. One being it does not need to be pointing into the wind to operate effectively so it can harness wind power even when it changes direction sporadically. One assumption of a disadvantage of a vertical axis wind turbine is that it takes more energy for the turbine to start spinning and has a slower rotational speed, both which could lead to other problems. These assumptions all depend on the design and should just be considered a design challenge by a progressive inventor. It takes one part common sense and one part humility to work with nature. This is a pretty big transition for us since most of us in the western world, where ironically ingenuity was founded, have been trained to dominate and overcome instead of to surrender and observe, as nature requires. Learning to honor and work with our natural elements may prove to be beneficial to us on many levels. Let's observe a short clip of Mike's Vertical Axis prototype called the Dynasphere. You can decide if this has a hard time starting up or a slow rotational speed for yourself.

You'd probably label that a fast rotational speed. Fast is relative to the speed the generator can handle. If the turbine spins too fast the brake would be engaged to keep the generator from burning up or wearing out too fast. Two DC generators will be mounted to the Dynasphere providing two sources of continuous 7.5 amps if the wind is continuously blowing. In lamems terms this will provide power available to the outlets in the house comparative to solar panels.

Also like an Earthship this design is functional as well as aesthetic. The petal art work on the turbine is created from reclaimed scrap metal from the landfill as well as using other recycled pieces also. Looking closely at the Dynasphere you can see another tire maybe the Leonardo Da Vinci's Vitruvian Man logo for Earthship should be in a tire .... I see a pattern here. There are no plans to gets expensive patents for this design to engage in capitalistic wars later. The plan is simply to get the invention into the hands of the people to start harnessing clean free energy. The design is simple enough it can be serviced anywhere in the world.

The prototype isn't completely finished yet, but Mike already has Dynasphere interest in Sweden considering it is cloudy the majority of the time there so solar power isn't an option for them, however they of have the unlimited possibility of wind energy.







Second Hit is near

Philippines Earthship

Join us for finishes on the Windship and building a wind proof - zero cost demonstration home for the local people.

Click here to sign up (volunteer spaces are limited)

Click here to donate

Philippines Earthship

Earthship Newsletter

Upcoming Events


Water: from the sky: clean and potable: Earthships catch water on the roof, from the sky (rain & snow melt) and use it four times.

Water is caught from a roof with a potable surface. From the roof, the water is channeled through silt catches into cisterns. Cisterns are sized to the local climate and are best buried and completely protected from the sun. The water from the cistern is gravity-fed into a Water Organizing Module with a pump and filter. The pump pushes the water into a pressure tank to supply code required water pressure. The filters clean the water for consumption and cleaning.

The WOM is a self-contained filtration unit designed for catch water homes.

The WOM filters the water for household use.

water organizing module

$2,995 plus shipping
Have it shipped to your door.
To Order: call 575-751-0462

Once the water has been processed by the WOM it can be used conventionally by household fixtures. The WOM filters the water of particulate matter for domestic use then filters the water with a bacterial filter to make it safe for drinking. Located at each fixture there is a designated drinking water faucet. The domestic water can be used for everything else including bathing and cooking.

The WOM is a pre-manufactured unit designed to simply attach to the wall and connect conventionally to household plumbing. The generic design makes it easy for any plumber to install the unit. Because the WOM is a manufactured, packaged filtering and pumping setup for catch water systems, it is cheaper, more efficient and more reliable than any custom design.

Please allow 2-4 weeks for shipment.
When ordering please specify voltage 12V DC, 24V DC or 110 AC
*Shipping not included and varies depending on location


Systems Latest Blog Posts

About Earthship Biotecture

Earthship construction drawings are designed to meet standard building code requirements so you can get a permit no matter where you are. Earthship Biotecture is beyond LEED Architecture. Earthships are green buildings that meet standard building codes. EarthshipBiotecture is based on the work of principal architect, Michael Reynolds. (see: media resume)

Earthships on Facebook | Earthships on Twitter | Earthships on LinkedIn | Earthships on YouTube | Earthships on Pinterest




English French German Italian Portuguese Russian Spanish

Contact Us

Main Office and Nightly Rentals
This email address is being protected from spambots. You need JavaScript enabled to view it.
+1 (575) 751-0462
Visitor Center +1 (575) 613-4409

Mailing Address:
P.O. Box 1041
Taos, NM  87571